iCOM FR9010 / FR9020 Series

110 W 100% Duty Cycle Operation

Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR9010 series provides a reliable 100% duty cycle operation at 110W* output. 
* 110W for VHF, 100W for UHF

500 Memory Channels Capacity

The 4×20-characters display, 16 key buttons, 500 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. The bar graph display shows the S-meter level and output power level.

D-SUB 25-pin Accessory Connector

The IC-FR9010 series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/ demodulation signals can be input/output from the D-SUB connector.

P25 Conventional Base Mode

As a P25 conventional base mode, the following P25 functions are programmable. 
(Conventional base mode only)

• Emergency
• Call alert
• Radio check
• Radio inhibit (Stun)
• Radio uninhibit (Revive)
• Status update
• Status request
• SBC log (Call log)

P25 Conventional, Analog FM and Mixed Mode

The IC-FR9010 series is compatible with both analog FM mode and P25 digital mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and P25 digital modes and to transmit either mode depending on the received signal.

Programmable CTCSS, DTCS and NAC

The IC-FR9010 series decodes analog CTCSS and DTCS and digital NAC (Network Access Code) on a per channel basis and downlinks these with the received signal when required.